WarmTouch
Classic Mat
Click to view WarmTouch Classic Mat pdf >>
 WarmTouch Classic Mats have proven time again that hard flooring
surfaces such as ceramic and natural stone tiles can be more than just
beautiful and clean, they can be comfortably warm and soothing.
WarmTouch Classic Mats are ideal for installation in small areas such
as kitchens, bathrooms, entries, sun-rooms, etc. The ultra-thin profile,
the product flexibility, and the variety of sizes make it perfectly suited
for both renovation and new construction.
WarmTouch Classic Mats are perfectly suited for installation under
tile, stone, and marble, but are versatile enough to warm other
approved floor coverings such as floating wood, laminates, linoleum,
and wall-to-wall carpeting as well.
WarmTouch Classic Mats feature an absorbent, textile mesh that
simplifies the mat installation and perfectly integrates into the floor
cross-section.
WarmTouch Classic Mats are produced with adhesive strips and are
sprayed from edge to edge with a bonding agent to securely adhere the
mat to the substrate and simplify the installation process.
WarmTouch Classic Mats should be embedded in latex-modified thinset
mortar for tile and stone warming applications.
When installing other floor coverings suitable for use with under floor
warming systems (i.e. floating wood, laminates, linoleum, or wall-to-wall carpeting) a 1/2” of self-leveling concrete should be used
to cover the Classic Mats before laying the floor covering. This 1/2”
of self-leveling concrete protects the warming elements, provides
a smooth & level surface to lay the flooring, assures optimal heat
distribution, and more efficient operation.
WarmTouch Classic Mats are equipped with a 1/8” thick cable to
minimize the elevation of the flooring. The cable is durable and is
screened from beginning to end to thoroughly protect the heating
element and provide an optimal level of safety.
This Twin-Conductor cable has a single connection point that simplifies
the installation process and the electrical set-up, by allowing you to
start the mat near the control location and end it at any desirable
point in the room.
| Technical Data |
| Mat Output |
15 W/Sqft |
| Cable Output |
3 W/Linear Ft |
| Voltage |
120V AC / 240V AC / 60Hz |
| Cable Outer Insulation |
PA Jacketing |
| Wire Thickness |
1/8” |
| Protection Means |
GFCI in accordance to NEC |
| Supply Lead Connection |
One side connection
(Twin Conductor) |
| Base Material |
White textile mesh |
| Cable Color |
Green |
| Wire Spacing |
2.5 ” |
Classic Mat Dimensions
WarmTouch Classic Mats are available in a variety of widths and lengths to simplify the planning process and to provide complete coverage. The mats can be customized on site to assure even heat distribution and optimal coverage.
|
